U350S5L EXOPRO Mineral Engine Flushing Oil 5L U350

EXOPRO OIL

EXOPRO lubricants are blended with virgin base oils and produced to meet or exceed OEM vehicle specifications using only the latest advanced additive technology to ensure complete engine and transmission protection. There are currently over 50 EXOPRO grades available; Low SAPS, fully Synthetic, Semi-Synthetic and Mineral engine oils along with premium gear and transmission oils. All EXOPRO products are supported by a quality guarantee under European Block Exemption Regulations. These lubricants can be used for vehicle servicing without invalidating the vehicle or replacement parts warranty, providing the application is as given in the EXOPRO Technical Data Sheet.

EXOPRO MINERAL ENGINE FLUSHING OIL

U350 Engine Flushing Oil is a mineral oil based engine flush containing detergents and dispersants to help remove deposits from engines. These specialised additives work to remove sludge and lacquer from engine components leaving the engine in a suitable condition to receive its next service fill of lubricant.

Applications:

Engine Flushing Oil can be used in both petrol and diesel engines in passenger cars, commercial vehicles and off highway equipment.

Directions For Use:

1. Run the engine until normal operating temperature is achieved

2. Drain the old oil

3. Fill with Engine Flushing Oil

4. Idle the engine for 5 – 10 minutes

5. Drain the flushing oil

6. Fill with an appropriate engine lubricant